Plunger Pump KTZ900
Plunger pump KTZ900 is a reciprocating, positive displacement, single-acting, horizontal three-cylinder plunger pump with a maximum input power of 900 hp. This pump is widely used in oil well operations, such as acidizing, fracturing and mud injection.
產品特點
Main structural characteristics:
1. Composed of two parts: the power end assembly and the fluid end assembly.
2. Features a double-key eccentric wheel structure for the crankshaft, with involute helical gears mounted at both ends of the crankshaft to transmit power and counteract axial forces. The large and small gears are placed inside the pump casing, making full use of the effective space, reducing the overall pump width, and facilitating the pump layout.
3. The pump is lightweight, compact, and capable of high pressure, making it suitable for small fracturing units (skid-mounted).
4. The fluid end and the power end are connected by 8 alloy steel tie rods. When removing the fluid end, the tie rods remain attached to the power end. The connection between the plunger and the crosshead uses threaded connections, making disassembly and maintenance of the fluid end easy.
5. The fluid end assembly can accommodate four different sizes of plungers (3.75", 4", 4.5" and 5"), providing various pressures and displacements for customer selection.
產品參數
|
|
|
||||||||||||||||||||
運行參數
Performance Parameters:
(Note: The parameters in the table are calculated based on 100% volumetric efficiency and 90% mechanical efficiency.)
|
Plunger Diameter (inches) （mm） |
Pump Strokes (rpm) |
||||||||||
|
100 |
150 |
200 |
250 |
300 |
|||||||
|
Displacement GPM (L/min) |
Pressure Psi (MPa) |
Displacement GPM (L/min) |
Pressure Psi (MPa) |
Displacement GPM (L/min) |
Pressure Psi (MPa) |
Displacement GPM (L/min) |
Pressure Psi (MPa) |
Displacement GPM (L/min) |
Pressure Psi (MPa) |
||
|
3.75" (95.25) |
115 (434) |
10500 (72.3) |
172 (652) |
8050 (55.5) |
230 (869) |
6034 (41.6) |
287 (1086) |
4830 (33.3) |
344 (1303) |
4032 (27.8) |
|
|
4" (101.6) |
131 (494) |
9420 (65) |
196 (741) |
7078 (48.8) |
261 (988) |
5308 (36.6) |
327 (1236) |
4250 (29.3) |
392 (1483) |
3540 (24.4) |
|
|
4.5" (114.3) |
165 (625) |
7500 (51.7) |
248 (938) |
5598 (38.6) |
330 (1251) |
4192 (28.9) |
413 (1564) |
3350 (23.1) |
496 (1876) |
2799 (19.3) |
|
|
5" (127) |
204 (772) |
6000 (41.3) |
306 (1158) |
4525 (31.2) |
408 (1544) |
3394 (23.4) |
510 (1931) |
2712 (18.7) |
612 (2317) |
2263 (15.6) |
|
|
Input Power |
590kW |
670kW |
670kW |
670kW |
670kW |
||||||
可選配置
Plunger Pump KTZ900 is mainly configured on various truck-mounted fracturing units, such as the YL70-670 truck-mounted fracturing unit; it is also commonly used in various skid-mounted drilling units, such as QZB70-670, QZB30-670, QZB42-380 and etc.
